How to choose snorkel fins 5 fit and size tips

When choosing snorkel fins, focus on 28-32cm length for most adults (shorter may lack power, longer risks ankle strain), ensure width fits snugly with toes touching the tip without squeezing, opt f...

Best way to dry snorkel gear 5 step post-dive routine

The best way to dry snorkel gear involves a 5-step post-dive routine: rinse with fresh water for 2 minutes to remove salt, disassemble masks/snorkels, shake off excess water, hang upside down on a ...

How to clean snorkel gear with vinegar 5 step deep clean method

To deep clean snorkel gear with vinegar, start by rinsing gear under fresh water to remove debris, then mix 1:1 vinegar-water solution in a tub; submerge gear for a 20-minute soak to loosen algae/g...

How are mini tanks tested 4 quality control processes

During quality control, mini tanks undergo dimensional inspections (with calipers verifying length/diameter tolerances of ±0.5mm) and pressure tests (pressurized with air to 30psi and held for 10 m...

How often to use stored air 4 rotation recommendations

For stored air systems following a 4-rotation cycle, aim to use each batch every 7-10 days—after each rotation, drain pressure to 2-3 bar (from 6-8 bar working levels) to prevent moisture buildup, ...

How to connect mini tank to BCD 4 attachment methods

To connect a mini tank to BCD, four methods work: first, quick-release buckles (5-7kg capacity) align slots for easy clipping; second, thread 1/4-inch NPT fittings into BCD ports for a snug fit; th...